Podiatry Hydrotherapy Whirlpool Tubs

Ten gallon stainless whirlpool units sized for seated foot and ankle treatment, in stationary and mobile frames for podiatry practices, wound care clinics and outpatient rehabilitation departments.

Home › Rehabilitation Equipment › Hydrotherapy Whirlpool Tubs › Podiatry Hydrotherapy Whirlpool Tubs

Podiatry Hydrotherapy Whirlpool Tubs for Foot and Ankle Treatment

A podiatry hydrotherapy whirlpool is a small capacity stainless whirlpool tub sized for foot and ankle immersion with the patient seated. Podiatry practices, wound care clinics, outpatient physical therapy departments and skilled nursing facilities use these units where the treatment is localized and a full immersion tub would be impractical. MSEC lists this category at 10 gallons, in a stationary version and three mobile configurations.

Shop Podiatry Hydrotherapy Whirlpool Tubs

Everything MSEC carries in Podiatry Hydrotherapy Whirlpool Tubs, shown in full. Specifications are supplied by the manufacturer. For current pricing, lead time or a quote on a purchase order, call toll free 877-706-4480.

Quick View
Select options
10 Gallon Mobile Podiatry Whirlpool
Item# M01PWHM $6,055.13
Quick View
Select options
10 Gallon Mobile Podiatry Whirlpool w/ Undercarriage
Item# UM01PWHM $7,341.03
Quick View
Select options
10 Gallon Mobile Podiatry Whirlpool w/ Handle
Item# HM01PWHM $6,874.36
Quick View
Select options
10 Gallon Stationary Podiatry Whirlpool
Item# S01PWHM $7,151.28

Choosing Between Models?

The Hydrotherapy Rehabilitation Tubs Clinical Guide walks through the decisions behind this purchase, with a comparison method, the mistakes that cause returns and a pre-order checklist.

Read the Buying Guide

Which Podiatry Whirlpool Configurations Does MSEC Carry?

Four listings, all at the same capacity. The difference between them is not the tank, it is how the unit is supported and how it is moved.

Listing	Capacity	Frame	What Changes
10 Gallon Stationary Podiatry Whirlpool	10 gallon	Stationary	Stays in one position in the treatment room
10 Gallon Mobile Podiatry Whirlpool	10 gallon	Mobile	Repositioned between chairs or rooms
10 Gallon Mobile Podiatry Whirlpool w/ Undercarriage	10 gallon	Mobile	Adds the undercarriage frame beneath the tank
10 Gallon Mobile Podiatry Whirlpool w/ Handle	10 gallon	Mobile	Adds a handle for controlled pushing and steering

That makes this an unusually simple category to specify. You are not choosing a size, you are choosing whether the unit stays put and, if it moves, how it is pushed. Practices that treat in one room order the stationary version. Practices that run several chairs or rooms order one of the mobile versions and match the chosen frame to the floor and the route those staff actually take.

What Separates the Three Mobile Versions From Each Other?

What is fitted to the unit, rather than what is in it. The plain 10 Gallon Mobile Podiatry Whirlpool is the base mobile configuration. The 10 Gallon Mobile Podiatry Whirlpool w/ Undercarriage adds a frame beneath the tank. The 10 Gallon Mobile Podiatry Whirlpool w/ Handle adds a handle for pushing and steering.

The handle version answers a specific complaint. Staff moving a filled or part filled unit without a handle push on the tank rim, which is awkward and gives poor control on a turn. A handle changes that into a controlled movement, and in a practice where the unit crosses a corridor several times a day it is the detail staff notice most.

The undercarriage version changes what sits under the tank and how the unit is supported. Before you choose between them, confirm the external dimensions and the overall height of the version you want against the chair position and the doorways on the route. Those figures are on the manufacturer specification and we will pull them for you.

Why Is a Podiatry Whirlpool Only 10 Gallons?

Because the treatment is localized to the foot and ankle, and the capacity is matched to that rather than to a body region. A 10 gallon tank has consequences that run all the way through the working day, which is why this size is the whole category rather than the smallest option in it.

Fill and drain time. A small tank turns around quickly, which is what makes multiple patients in a session realistic.
Water volume per patient. Each session uses a small volume, so the practice is not tied to a high capacity supply.
Filled weight. A 10 gallon unit is manageable in a room that could never take a full immersion tub.
Footprint. The unit fits beside a treatment chair rather than requiring a dedicated hydrotherapy space.
Cleaning between patients. A small tank is drained and cleaned to protocol far faster than a large one, which matters when turnaround is the constraint.

If the caseload needs more than foot and ankle coverage, the answer is a different line, not a larger podiatry unit.

Where Does a Podiatry Whirlpool Sit in a Treatment Room?

Beside the chair, at a position that works for both the seated patient and the clinician. That sounds obvious and it is where most placement problems start, because three things have to line up at once: the patient’s seated position, the staff member’s working access, and the route for filling and emptying the unit.

Plan the fill and drain route before you plan the unit position. A unit placed where it looks tidy but is awkward to empty will be moved within a week, and on a mobile frame it will be moved repeatedly, which is exactly the situation the handle version is built for. Also plan the power cord route, since a cord crossing a walking route in a wet area is a hazard your safety officer will raise.

Storage between sessions is the other question worth settling before the unit arrives. A stationary unit lives where it is installed, so the room has to give up that space permanently. A mobile unit can be parked out of the treatment area between patients, which is often the reason a small practice chooses one, but it then needs somewhere to be parked that is not a corridor and not next to a power outlet it will trip over. Decide that spot in advance and the unit stays useful.

Wet floor management applies here too, at a smaller scale than a full immersion room but with the same requirement for a plan rather than a mop.

What Should You Confirm on the Specification Sheet Before Ordering?

Confirm the dimensions and the drain arrangement first, since those decide whether the unit works in the room you have.

External dimensions and overall height for the exact configuration, since the undercarriage and handle versions are not identical to the base unit.
Chair and patient position relative to the rim, confirmed with the clinicians who will use it.
Fill method and drain arrangement, including what hardware comes with the unit.
Casters on mobile versions, whether they lock, and whether they suit your floor finish.
Electrical supply and cord length at the intended position.
Cleaning protocol compatibility with the disinfectant your infection control policy already names.
Serviceable parts, meaning which fittings, valves and casters can be ordered on their own later.

Call 877-706-4480 toll free, 713-706-4480 local, or email inquiry@msecompany.net and we will confirm each item against the manufacturer specification before you raise the purchase order.

How Does a Podiatry Whirlpool Differ From an Extremity Whirlpool?

The two lines overlap in purpose and differ in how the unit is set up around the patient. Both handle localized immersion rather than body immersion, and a practice treating feet will often shortlist from both categories at once.

Podiatry units are configured around a seated patient at a treatment chair, which is why the MSEC listings differ mainly by how the unit is supported and moved. Extremity whirlpools cover a wider set of localized applications, including upper limb work where the unit needs to be presented at a different height. If your caseload includes hand, wrist or elbow treatment alongside feet, compare Extremity Hydrotherapy Whirlpool Tubs before you commit to a podiatry unit.

The hydrotherapy rehabilitation tubs clinical guide walks through that choice in the context of a full caseload rather than a single room.

When Should a Practice Order From a Different Whirlpool Line?

When the treatment moves beyond the foot and ankle, when patient transfer is the constraint, or when you only need parts.

You need partial or full body immersion. See Sports Hydrotherapy Whirlpool Tubs for the large capacity end of the range.
You need a different rim height or entry position. Compare Hi-Boy, Lo-Boy and Slant Back tubs.
Getting the patient into the tub is the problem. Look at Hydrolift Hydrotherapy Whirlpools.
You need covers, hoses or replacement hardware. Go to Hydrotherapy Whirlpool Tub Accessories.

To compare every whirlpool line side by side, start at Hydrotherapy Whirlpool Tubs. If you are fitting out a department rather than adding one unit, work down from the rehabilitation equipment hub.

Frequently Asked Questions

Is the podiatry whirlpool available in a capacity other than 10 gallons?

Every podiatry whirlpool MSEC lists is a 10 gallon unit. The four listings differ by frame and fittings rather than by capacity. If your caseload needs more water than that, you are looking at a different line rather than a larger podiatry unit, and we can point you at the extremity or full immersion ranges depending on what you are treating.

What is the difference between the handle version and the undercarriage version?

The handle version adds a handle for pushing and steering, which gives staff proper control when the unit is moved between chairs or rooms. The undercarriage version adds a frame beneath the tank, changing how the unit is supported. They are separate listings rather than options on one unit, so the choice is made at order time.

Can the stationary podiatry whirlpool be moved later?

Treat the stationary and mobile versions as different products rather than the same unit with an accessory. If there is any chance the unit will need to move between chairs or rooms, order a mobile version at the start. Tell us how your rooms are used when you call and we will steer you to the frame that matches, before the order is placed.

Does a podiatry whirlpool need plumbing at the treatment position?

Confirm the fill and drain method on the specification for the exact unit before you plan the room. What matters most in practice is the route for filling and emptying, not just the connection, because that route decides where the unit can realistically sit. Send us your room layout with the chair position and we will confirm what the unit requires.

Can we order several units for multiple treatment chairs?

Yes, and standardizing on one configuration across the practice is usually worth doing. It keeps the cleaning routine identical at every chair, keeps staff familiar with one unit, and means a single spare part fits anything you own. Call 877-706-4480 toll free or 713-706-4480 local with your chair count and we will quote the group together.

Do you supply replacement parts and accessories for podiatry whirlpools?

Yes. Covers, hoses and replacement fittings are handled through Hydrotherapy Whirlpool Tub Accessories, and individual valves, casters and hardware can usually be ordered on their own. Have the model and serial number from the unit plate ready when you contact us at inquiry@msecompany.net, since that is what identifies the correct part first time.