Hot & Cold Therapy Equipment
Installed and powered thermal therapy equipment, including mountable lotion and gel warming units, for outpatient clinics, hospital rehabilitation departments and athletic training rooms.
Home › Rehabilitation Equipment › Hot & Cold Therapy & Supplies › Hot & Cold Therapy Equipment
Hot and Cold Therapy Equipment for Clinics and Rehabilitation Departments
Hot and cold therapy equipment is the powered and installed hardware a thermal therapy room runs on, as opposed to the packs, covers and wraps that pass through it. MSEC lists the Mountable Electric Lotion & Gel Warmer in this category, a wall mounted warming unit for bottled lotion and gel. Outpatient clinics, hospital rehabilitation departments, chiropractic offices and athletic training rooms buy from here when they are fitting out a room rather than restocking one.
Shop Hot & Cold Therapy Equipment
Everything MSEC carries in Hot & Cold Therapy Equipment, shown in full. Specifications are supplied by the manufacturer. For current pricing, lead time or a quote on a purchase order, call toll free 877-706-4480.
-
Quick ViewSelect optionsMountable Electric Lotion & Gel Warmer
Item# 2104DJO Original price was: $447.37.$325.93Current price is: $325.93.
Choosing Between Models?
The Hot & Cold Therapy & Supplies Buying Guide walks through the decisions behind this purchase, with a comparison method, the mistakes that cause returns and a pre-order checklist.
Which Items Count as Equipment Rather Than Consumables in a Thermal Therapy Room?
Equipment is anything that is installed, powered or plumbed and stays in the room for years. Consumables are the items that cycle through laundry, wear out and get reordered, and they live in the Hot & Cold Therapy & Supplies line instead.
The distinction matters because the two are bought on different cycles and usually out of different budgets. Equipment is a capital decision with a site survey attached to it: power, mounting, clearance and delivery all have to be settled before the purchase order goes out. Consumables are a par level decision that repeats every month, driven by visit volume and laundry turnaround.
Get the equipment decision wrong and you are living with it for the life of the room. Get a consumable order wrong and you correct it at the next reorder. That is why this page stays on the installed items and the questions facilities has to answer, and why the hot and cold therapy buyer guide handles the recurring supply decisions separately.
What Does the Mountable Electric Lotion and Gel Warmer Do in a Treatment Room?
The Mountable Electric Lotion & Gel Warmer is an electrically powered wall unit that holds bottles of lotion or gel and keeps them warm and ready at the point of use. Clinicians who apply lotion during manual therapy or gel during ultrasound work commonly warm the product before application, and a mounted warmer keeps that step from becoming a trip to a back room.
Because it mounts, it consumes wall rather than counter space, which is the practical argument for it in a small treatment bay where the counter is already carrying the modality unit, the linen and the supplies caddy. It also fixes the bottle position, so every clinician reaches to the same place instead of hunting for where the last person left it.
Confirm how many bottles the unit holds and what bottle sizes it accepts against the manufacturer’s documentation before ordering, because bottle format is what decides whether the warmer fits your existing supply or forces a change to the product you buy.
Where Should a Wall Mounted Warmer Be Installed in a Treatment Bay?
Mount it within arm’s reach of the working side of the table, on a wall that meets the manufacturer’s fixing requirement, and within reach of a receptacle without a cord crossing a walkway. Those three constraints usually narrow the position to one or two spots in a typical bay.
Work through the room in order. Fix the table position first, since it is set by patient access and transfer space. Choose the clinician’s working side, then place the warmer where a hand can reach it without the clinician stepping away from the patient. Check the height against the shortest clinician who will use the room, not against the person doing the install.
Then deal with the wall and the power. Have facilities confirm the wall construction against the stated mounting requirement, and check what sits behind the fixing points. Confirm the receptacle position before install, because a cord run across a doorway or a treatment space will be flagged on a safety round and the unit will end up unplugged. Keep the warmer clear of the sink splash zone and away from linen storage.
What Power and Room Requirements Does Thermal Therapy Equipment Carry?
Confirm the electrical supply, the mounting surface, the clearance around the unit and the drainage situation before anything is ordered, because these are facilities questions rather than purchasing questions and they take time to answer.
- Electrical supply. Verify the stated voltage and receptacle type against the circuit that serves the bay, and confirm whether your biomedical program adds the unit to an electrical safety inspection schedule.
- Mounting surface. Confirm the wall construction, the fixing pattern and the hardware supplied against the manufacturer’s requirement.
- Clearance. Leave the ventilation and access clearance the manufacturer states, and leave room to lift a bottle in and out without knocking anything.
- Water and drainage. Larger thermal units in this line may need a fill and drain plan and a floor that tolerates water, so confirm what the specific unit requires before you schedule an install.
- Delivery access. Confirm whether the shipment is parcel or freight and who will receive, inspect and install it.
What Should a Buyer Confirm on the Specification Sheet Before Ordering?
Confirm capacity, bottle or container compatibility, controls, permitted cleaning agents and replaceable parts against the manufacturer’s documentation rather than the catalog photo. Thermal equipment is straightforward to buy and easy to buy in the wrong format.
- Capacity and container fit. How many bottles or containers the unit holds and which sizes it accepts.
- Controls. How the unit is set and whether it indicates its state, so staff can tell at a glance whether it is running.
- Cleaning compatibility. Which disinfectants the manufacturer permits on the housing and interior surfaces, checked against the product your infection control policy already specifies.
- Serviceable parts. Whether cords, controls and interior components can be replaced rather than requiring a whole unit.
- Warranty and documentation. What arrives with the unit and what has to be registered or filed at commissioning.
Call 877-706-4480 toll free or 713-706-4480 locally, or email inquiry@msecompany.net, and we will confirm the stated specification before you raise the purchase order.
How Is a Warming Unit Cleaned and Kept in Service?
Clean it on the same schedule as the rest of the room and watch for product residue, because lotion and gel that escapes a bottle is what actually damages these units. A warmer is low maintenance, not no maintenance.
Wipe the exterior and the interior contact surfaces with a disinfectant the manufacturer permits, and check the permitted agent list before standardizing, since the wrong product can attack a housing over time. Remove bottles and clean underneath them rather than around them, and deal with a leaking or weeping bottle the day it is noticed rather than at the next deep clean.
Check the cord and plug on the same round you check the rest of the bay, looking for damage at the strain relief where the cord leaves the housing. Keep the model name and install date in the department’s equipment log so a replacement part can be matched without guesswork later. Rotate stock so bottles are used in the order they were loaded rather than sitting warm for weeks at the back of the unit.
When Does a Department Need Packs, Covers or a Different Rehabilitation Line Instead?
Order from the supplies line when the item is consumed rather than installed, and from another rehabilitation line when the requirement is not thermal at all.
- Hot & Cold Therapy & Supplies. The parent line for packs, covers, wraps and the other items that cycle through laundry and reorder. If you are replacing what a unit holds rather than the unit itself, start there.
- Hot and cold therapy buyer guide. The decision walkthrough for matching supplies to equipment you already own and setting reorder quantities.
- Rehabilitation Equipment & Products. The hub covering therapeutic devices, hydrotherapy tubs, treatment tables and gym equipment when the room needs more than thermal therapy.
If the piece of equipment your room plan calls for is not listed on this page, tell us the room, the power available and what the clinicians are asking for, and we will source against manufacturer specifications rather than substituting something that looks similar.
Frequently Asked Questions
Is the lotion warmer supplied with mounting hardware?
Confirm that on the specification sheet before ordering, since hardware provision varies by manufacturer and by wall type. Even where fixings are supplied, they are generic and your facilities team still has to confirm they suit the wall construction in that bay. Send us the wall detail and we will check what the manufacturer states for the model you are quoting.
Can a warming unit be installed on a mobile cart instead of a wall?
The Mountable Electric Lotion & Gel Warmer is listed as a mountable unit, so confirm any alternative installation against the manufacturer’s documentation before committing to it. A cart mounted arrangement also has to solve the power cord question, because a unit that unplugs every time the cart moves rarely stays at working temperature. Tell us the arrangement you have in mind and we will check what is supported.
Do we need a separate warmer in every treatment bay?
That depends on how far a clinician has to walk and how many bays run at once. A shared warmer between two adjacent bays works when the doorway is open and the walk is short. Once staff start carrying bottles between rooms, the warmer stops being used as intended and a second unit is usually the more practical answer than a workflow rule.
Which bottle sizes will the warmer accept?
Confirm accepted container sizes against the manufacturer’s specification before you order, because the warmer has to suit the lotion and gel format your department already buys. If your standard bottle does not fit, you are choosing between changing your consumable or changing the equipment. Check it at the quote stage, not at installation.
Does this equipment need to be on the biomedical inventory?
That is your facility’s call, set by your own policy on powered equipment in patient care areas. Many departments add any mains powered unit in a treatment bay to the electrical safety inspection schedule. Decide it at commissioning and record the model, serial number and install date in the equipment log while the paperwork is still in hand.
What if the thermal equipment our room plan calls for is not listed here?
Tell us what the room needs, including the power available, the mounting or floor situation, the drainage if any, and what the clinicians have specified. We source against manufacturer documentation rather than substituting a similar looking item. Call 877-706-4480 toll free, 713-706-4480 locally, or email inquiry@msecompany.net with the room details and a quote will follow.
Related Categories
Move up to Hot & Cold Therapy & Supplies, or across to the lines ordered alongside this one.
Hot & Cold Therapy & Supplies
The full Hot & Cold Therapy & Supplies line.
GSA contract holder • Ships nationwide • From Patient to Doctor & Everyone In Between
Talk to a Medical Equipment Specialist
Toll free 877-706-4480 | Local 713-706-4480 | inquiry@msecompany.net