Taping Tables & Stations
H-brace taping tables in 27in and 30in widths and single athletic taping stations at 36in and 42in high, with shelf options, finish care and pre-order checks.
Home › Rehabilitation Equipment › Taping & Chiropractic Tables › Taping Tables & Stations
Taping Tables and Stations for Training Rooms and Clinics
Taping tables and stations are braced, fixed height surfaces an athlete sits or lies on while a trainer or clinician tapes an ankle, knee, wrist or shoulder. The tables in this category are built on an H-brace frame and listed by width, with or without shelving. The stations are listed by working height instead. Athletic training rooms, school and college programs, clinics and rehab departments buy them as room furniture, so frame, finish and storage configuration decide the order.
Shop Taping Tables & Stations by Type
Choosing Between Models?
The Taping & Chiropractic Tables Buying Guide walks through the decisions behind this purchase, with a comparison method, the mistakes that cause returns and a pre-order checklist.
What Does the H-Brace Frame Do on a Taping Table?
It ties the legs together through a horizontal member so the frame resists the sideways and diagonal loading a taping bench actually takes. An athlete sitting down abruptly, or a trainer leaning across the surface while working an ankle, loads the table off center, and an unbraced four leg frame racks under exactly that load.
That geometry has practical consequences a buyer should know about. The brace is a bolted structural member, so it can be retightened over the table’s life, and a table that starts to feel loose is usually hardware rather than a failed frame. The brace also sits in the space under the table, which affects where a shelf can go and where an athlete’s feet rest. And because the bracing does the work rather than mass, weight is a poor proxy for stability here. Confirm the rated capacity from the manufacturer specification rather than inferring it from how heavy a table feels.
Every table listed on this page carries that H-brace construction, so the differences between them sit in finish, storage and size.
Which Taping Tables and Stations Are Listed in This Category?
Four listings, sitting in the Single Athletic Taping Tables subcategory, and their names state the frame, the finish, the storage and one dimension each.
| Listing | Frame and finish stated | Storage stated | Dimension stated in the name |
|---|---|---|---|
| H-Brace Taping Table | H-brace frame | None stated | None stated, confirm on the specification |
| Natural Wood H-Brace Taping Table w/ Shelf 27in/30in W | H-brace frame, natural wood | Shelf | 27in or 30in wide |
| Natural Wood H-Brace Taping Table w/ End Storage Shelves 27in/30in W | H-brace frame, natural wood | End storage shelves | 27in or 30in wide |
| Single Athletic Taping Station 36in/42in H | Single station | None stated | 36in or 42in high |
Read that table as a list of what is stated, not of what exists. Where a dimension or a capacity is not in a name, it is confirmed against the manufacturer specification before the order goes in, and we will pull the current figures for the exact model when you call.
Is a Taping Station Different Furniture From a Taping Table?
Yes, and the listings say so in the dimension each one states. The Natural Wood H-Brace tables are listed by width at 27in or 30in, which is a surface an athlete sits or lies on. The Single Athletic Taping Station 36in/42in H is listed by height at 36in or 42in, which is standing height working furniture.
That changes three things in the room. The athlete gets onto a 36in or 42in high station differently than onto a table, so think about how they mount it and whether a step is needed for shorter athletes. The trainer works standing at a station rather than bending over a lower surface, which is why the two heights exist and why the choice is made against the staff who will use it every day. And a station occupies a different part of the room, typically against a wall run, while a table wants clearance on more than one side.
Choosing between the two heights against your own staff is covered in the taping and chiropractic tables buyer guide.
Should You Order the Table Plain, With a Shelf, or With End Storage Shelves?
The three storage configurations are separate listings, so this is decided before the order rather than added later. A plain H-Brace Taping Table keeps the space beneath it clear. The Natural Wood H-Brace Taping Table w/ Shelf 27in/30in W puts a shelf underneath. The Natural Wood H-Brace Taping Table w/ End Storage Shelves 27in/30in W puts shelving at the ends of the table instead.
Judge it on two things a catalog photograph will not show you. The first is the cleaning routine: an under table shelf is another surface that has to be wiped and it limits how a mop reaches the floor beneath, while end shelving keeps the floor under the table open. The second is foot space: an under table shelf and the H-brace both occupy the volume where an athlete’s heels go when seated, which matters more on a bench that is used for ankle work all afternoon.
If your room already has casework within reach of the bench, the plain table is usually the cleaner choice.
How Should a Natural Wood Surface Be Cared For in a Training Room?
Confirm the finish and the permitted cleaning agents on the manufacturer specification first, then build the routine around that answer rather than around whatever wipe the room already stocks. Two of the tables here state natural wood in the name, and a wood surface responds differently to daily disinfection than laminate or upholstery does.
- Agents. Confirm which disinfectants are permitted on the finish before you standardize, because an aggressive agent dulls a finish long before it fails.
- Moisture. Wipe rather than flood, and pay attention to edges and end grain, which is where moisture reaches the material.
- Edges and corners. These take the contact from athletes in cleats and wet gear. Inspect them on the same schedule as the hardware.
- Hardware. Retighten the brace and leg bolts on a set interval, since a bolted frame loosens gradually under repeated off center loading.
- Padding. Where a top is padded, confirm the covering material and whether the pad is available as a replacement part.
A room near a hydrotherapy corner or a shower block has moisture in the air all day, which is worth raising with us before you choose a finish.
What Should You Confirm on the Specification Sheet Before Ordering One of These Tables?
Confirm every dimension the name does not state, plus capacity, top construction and how the table arrives. The listing names give you width or height and the storage configuration, and nothing else should be assumed.
- Unstated dimensions. Length and top height on the tables, and width and length on the station.
- Weight capacity. From the manufacturer specification for the exact model.
- Top construction. Whether the top is bare wood or padded, and if padded, the covering and whether it is replaceable.
- Shelf detail. Shelf dimensions and what the shelf is rated to hold.
- Assembly. Whether the table arrives assembled, part assembled or flat, who assembles it, and whether the hardware is supplied.
- Glides and levelling. Needed on any floor that is not flat, and the first fix for a bench that rocks.
- Delivery route. The narrowest doorway, corridor turn, stair landing or elevator between the delivery point and the room.
- Availability, lead time and warranty terms. Get all three in writing for the exact model before the purchase order goes out.
How Do You Add or Replace a Table in a Row You Already Have?
Order it against the table you already own rather than against the catalog name alone, because a row that does not match is obvious from the door and is worse to work at. Send us the model name, the width or height you hold, photographs of the frame and finish, and the approximate year of purchase.
Three things are worth confirming before a top up order. Confirm the current specification against the one you were supplied, since configurations change between generations. Confirm the finish, because natural wood varies between batches and a new table will not necessarily match an older one exactly. And confirm the same width or the same station height across the row, so the working surfaces stay level with each other and staff are not adjusting their posture between positions.
Where you are adding more than one table, order them together. Consolidating onto one freight shipment is materially cheaper than taking two deliveries into a building that needs a liftgate and someone to carry the crates to the room.
When Does a Buyer on This Page Need the Wider Line Instead?
When the surface is for treatment rather than taping, or when the room has to move a roster rather than serve one athlete at a time.
- Treatment room surfaces: the full Taping and Chiropractic Tables line covers chiropractic and clinic treatment tables, where technique, upholstery and clearance drive the specification rather than frame and storage.
- Choosing height and width against your own staff: the buyer guide works through working height, width and service life as a decision rather than a list.
- Everything else in the room: Rehabilitation Equipment and Products holds the mat tables, modality equipment and hydrotherapy items that usually land on the same pallet as a taping order.
If the configuration you need is not one of the four listed here, tell us the width or height, the storage you want and the room constraints, and we will confirm what is available. Call 877-706-4480 toll free or 713-706-4480 local, or email inquiry@msecompany.net.
Frequently Asked Questions
What does H-brace mean on these tables?
It describes the frame geometry, where a horizontal member ties the legs together so the structure resists off center and diagonal loading rather than relying on mass. It is a bolted structural member, which means it can be retightened over the table’s service life. Confirm the rated weight capacity from the manufacturer specification rather than assuming a braced frame implies a particular figure.
Is the top of an H-Brace taping table padded?
Confirm it on the specification for the exact model, since the listing names state the frame, finish, storage and one dimension, not the top construction. If the top is padded, ask about the covering material, whether the pad is a replaceable part, and which cleaning agents are permitted on it. If it is bare wood, the finish care answer applies instead.
Can a taping station be used by a seated athlete?
The Single Athletic Taping Station is listed at 36in or 42in high, which is standing height working furniture rather than a seated bench. How an athlete mounts a surface at that height, and whether a step is needed for shorter athletes, is worth settling before the order. Where the room mainly needs a seated surface, the H-brace tables listed by width are the closer fit.
Do these tables arrive assembled?
Confirm it on the quote, along with who assembles and levels the table on site, since a training room sits deep inside a building and the delivery crew is rarely the crew that builds furniture. Ask whether hardware is supplied and keep the assembly instructions with the equipment log, because the brace and leg bolts should be retightened on a schedule afterward.
Can we add a shelf to a plain table later?
The shelf and end storage versions are listed as separate configurations rather than as accessories, so decide it at the point of order. If you already hold a plain table and want storage at that position, tell us the model and we will confirm whether anything is available for it rather than improvising a fit. Adding unsupported shelving to a braced frame is not a good idea.
How do we match a new table to the ones we already have?
Send the model name, the width or height you hold, photographs of the frame and finish, and roughly when the existing tables were bought. We will check the current specification against what you were supplied, since configurations change between generations. Natural wood also varies between batches, so confirm expectations on finish match before ordering rather than after the crate is opened.
Related Categories
Move up to Taping & Chiropractic Tables, or across to the lines ordered alongside this one.
Taping & Chiropractic Tables
The full Taping & Chiropractic Tables line.
GSA contract holder • Ships nationwide • From Patient to Doctor & Everyone In Between
Talk to a Medical Equipment Specialist
Toll free 877-706-4480 | Local 713-706-4480 | inquiry@msecompany.net