Single Athletic Taping Tables
Standing height single athlete taping stations listed at 36in and 42in for athletic training rooms, school and college programs and clinic taping areas.
Home › Rehabilitation Equipment › Taping & Chiropractic Tables › Taping Tables & Stations › Single Athletic Taping Tables
Single Athletic Taping Stations for Athletic Training Rooms
A single athletic taping station is standing height taping furniture built for one athlete position at a time. Athletic training rooms, school and college programs and clinic taping areas buy it as room furniture. MSEC lists it under taping tables and stations, inside the wider taping and chiropractic tables line. The station is specified by working height rather than by surface width, so the order turns on the staff who tape at it.
Shop Single Athletic Taping Tables
Everything MSEC carries in Single Athletic Taping Tables, shown in full. Specifications are supplied by the manufacturer. For current pricing, lead time or a quote on a purchase order, call toll free 877-706-4480.
-
Quick ViewSelect options
Choosing Between Models?
The Taping & Chiropractic Tables Buying Guide walks through the decisions behind this purchase, with a comparison method, the mistakes that cause returns and a pre-order checklist.
What Is Listed Under Single Athletic Taping Tables Right Now?
One listing: the Single Athletic Taping Station 36in/42in H, a single position station stated at 36in and 42in working height. That is the whole of this category today, and a thin list is easier to buy from when nobody pretends otherwise.
- Stated in the name. A single athlete position, the station format, and the two working heights of 36in and 42in.
- Not stated in the name. Surface width and depth, top construction, storage, glides and rated capacity, each confirmed against the manufacturer specification for the exact model.
The H-brace taping tables that share a training room with this station are listed one level up on Taping Tables and Stations, stated by width instead. Nothing else sits under this category, so if you are comparing several taping surfaces, start on the parent page.
How Do You Choose Between the 36in and the 42in Working Height?
Choose against the staff who will stand at it every day, because the trainer is the one holding a working posture for an afternoon of ankles. The two stated heights, 36in and 42in, exist for rooms with different staff and different bench runs.
- Measure the people, not the room. Have your trainers tape at an existing surface. Whichever height lets the shortest and tallest staff work without stooping or reaching is the one to order.
- Measure from the finished floor. Include any mat, rubber flooring or platform that will sit under the station, since that thickness comes off the usable working height.
- Line it up with the casework you already have. A station that sits proud of or below the counter run beside it makes the room awkward to work along.
Working height as a purchasing decision is taken apart in the taping and chiropractic tables buyer guide.
What Does the Space Around a Taping Station Have to Allow For?
Access on the working side, a clear path for the athlete, and supplies within arm reach. A station is fixed furniture in a room that gets busy in a narrow window before practice, so the layout decides whether it is usable when it matters.
- Working space. Enough room for the trainer to move around the taped limb without backing into the traffic lane behind them.
- Floor condition. Confirm whether the station has levelling glides, since a station that rocks is the first thing staff complain about.
- Supply reach. Tape, underwrap, scissors and a waste bin close enough that the trainer is not walking away mid job.
- Egress and wall runs. Keep the station off door swings and out of the exit route, settled with facilities staff before delivery.
Items that mount to or sit beside a station are grouped under Taping Station and Table Accessories, part of the category structure here rather than a stocked list today. Tell us what you need and we will confirm what is available.
Which Details Are Missing From the Product Name and Have to Be Verified?
Everything except the station format and the two stated heights. The name gives you 36in and 42in and nothing more, so the rest is verified against manufacturer documentation before the purchase order goes out.
- Surface width and depth. The footprint the station takes on the floor and the working area on top of it.
- Top construction and covering. What the surface is made of, whether it is padded, and which cleaning agents are permitted on it.
- Rated capacity. Taken from the specification for the exact model, never inferred from how solid a station looks.
- Assembly. Whether it arrives assembled, part assembled or flat, and who builds and levels it on site.
- Delivery route. The narrowest doorway, corridor turn or elevator between the loading point and the training room.
- Availability, lead time and warranty terms. All three in writing for the exact model and the exact height.
We will pull the current manufacturer figures before you commit. Call toll free 877-706-4480, locally 713-706-4480, or email inquiry@msecompany.net.
Is This the Same Category as the Taping Bench Page With the Same Name?
No. The two categories share a name and hold no products in common, which is worth knowing before you spend an afternoon comparing the wrong list. This page holds the Single Athletic Taping Station 36in/42in H, a standing height station stated by height. The other page, Single Athletic Taping Tables, holds four bench listings: the Laminate Base Double Bench, the Laminate Base Single Bench 24 in, the Steel Frame Single Bench and the Steel Frame Double Wide Bench.
- Stay here if the decision is standing height taping furniture and the question is 36in against 42in.
- Go to the bench page if the decision is a seated bench, a laminate base against a steel frame, or single against double wide seating.
Rooms often buy from both, a bench for seated work and a station for standing work. Order them together where you can, since one freight shipment costs less than two deliveries into the same building.
Where Should You Go If This Station Is Not the Piece You Need?
Up to the parent line, sideways to the configuration category that matches, or to the guide if the decision is still open. Each sibling category below is part of the taping tables and stations structure rather than a stocked list today, so use them as the place to start and call for what is currently available.
- Multi-Person Athletic Taping Tables for a room taping several athletes at once.
- Split Leg Taping Tables for the split leg surface configuration.
- Hydraulic Taping Table for buyers who want working height changed at the table rather than fixed at order.
- Taping Station and Table Accessories for what sits beside the furniture.
- Taping Tables and Stations for the H-brace tables listed by width.
- Taping and Chiropractic Tables Buying Guide for the height, width and service life decision.
- Rehabilitation Equipment and Products for the mat tables and training room items that ship on the same pallet.
Tell us the height, the room constraints and the quantity, and we will confirm what can be supplied.
Frequently Asked Questions
Does 36in/42in mean the station adjusts, or that two heights are offered?
The product name states both heights for the Single Athletic Taping Station 36in/42in H, and how they are supplied is confirmed on the manufacturer specification for the exact model. Settle it before the order rather than after, because a fixed height station is chosen once and lived with. Call us and we will read the current documentation back to you.
Can more than one athlete be taped at this station at the same time?
It is listed as a single athlete position, so plan on one at a time. A training room working through a roster in a short window before practice usually needs either several positions or a mix of station and bench furniture. Multi-Person Athletic Taping Tables is the category for multiple positions, and nothing is listed under it at present, so call for what is available.
What do you need from us to quote a taping station?
The height you want, the quantity, the room the station is going into with its delivery route, and the date you need it on site. If you already own taping furniture, send the model name and a photograph so the new piece works alongside it. Call toll free 877-706-4480, locally 713-706-4480, or email inquiry@msecompany.net.
Do shorter athletes need a step to reach a station at 42in high?
Decide it against the athletes you actually work with, since a 42in working height is set for the trainer standing at it rather than for the athlete reaching it. Rooms that tape younger or shorter athletes often keep a step nearby and allow floor space for it. Where most work is seated, a bench is usually the better fit than a station.
What if we need a station height other than 36in or 42in?
Tell us the height you want and what the room has to accommodate, and our specialists will confirm what can be supplied. The listed catalog is not the limit of what we can source, and taping furniture is frequently ordered outside the standard configuration. Call toll free 877-706-4480 or locally 713-706-4480.
Related Categories
Move up to Taping Tables & Stations, or across to the categories beside this one.
Taping Tables & Stations
The full Taping Tables & Stations category.
Multi-Person Athletic Taping Tables
Part of the catalog structure.
Split Leg Taping Tables
Part of the catalog structure.
Hydraulic Taping Table
Part of the catalog structure.
Taping Station & Table Accessories
Part of the catalog structure.
GSA contract holder • Ships nationwide • From Patient to Doctor & Everyone In Between
Talk to a Medical Equipment Specialist
Toll free 877-706-4480 | Local 713-706-4480 | inquiry@msecompany.net